Texas Instruments ti nspire cx Getting Started Guide

98 Updating the handheld operating system
Receiving
handheld
This message, along with a progress bar, is
displayed while the OS Upgrade is being
transferred.
Receiving
handheld
This message is displayed when the transfer is
complete. It is shown to keep you informed of the
handheld’s status.
Receiving
handheld
This information message displays briefly before
the handheld automatically reboots.
Receiving
handheld
An error occurred during the transmission, and the
installation was corrupted. The handheld will
reboot. After the reboot, reinstall the OS Upgrade.
Shown on: Message and Description
“Receiving OS. Do not
unplug cable.“
“Installing OS.“
“OS has been installed.
Handheld will restart.“
OK
“Install was corrupted.
Handheld will reboot. You
will need to retry OS
upgrade.“
OK

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing