Configuring the TI-Nspire™ CX handheld 61
3. Press e to move through the list of settings. Press £ to move
backward through the list.
A bold line around a box indicates it is active.
4. Press
¢ to open the drop-down menu to view the values for each
setting.
5. Press the
£ and ¤ keys to highlight the desired option, then press
x or · to select the value.
6. Click
Make Default to save all the settings as default settings that will
be applied to all future TI-Nspire™ documents, PublishView™
documents, and to Scratchpad.
• Select the question mark to open Help.
• Select Restore to restore the original factory settings.
Changing General Settings in a TI-Nspire™ document
Complete the following steps to change general settings for an open
TI-Nspire™ document. You can apply the settings to the current
document only or choose to make the settings the default settings for
the open document and all future documents.
1. To access General Settings from an open document, press
c521.
2. Press e to move through the list of settings. Press £ to move
backward through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press
¢ to open the drop-down
menu to view values for each setting.
To Next Page
Loading...
Need help?
General
