Texas Instruments ti nspire cx Getting Started Guide

62 Configuring the TI-Nspire™ CX handheld
4. Press the 5 and 6 keys to highlight the desired option, then press
x or · to select the value.
5. Click
OK or press x or · to apply the new settings to the open
document and return to the Home screen. When you click OK, the
settings are only applied to the open document.
To apply the new settings to this document and documents created in
the future, select
Make Default and press x or ·.
• Click
OK to apply the settings to any open documents and save the
settings as defaults for new documents and for Scratchpad.
Restoring General Settings
Complete the following steps to restore the original factory settings to
open or new documents and to the Scratchpad.
1. From the Home screen, press
521 to open the General Settings
dialog box.
2. Use the Touchpad or press
e to select Restore, then press ·.
The Restore Defaults dialog box opens.

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing