Connecting handhelds and transferring files 79
Common error and notification messages
Shown on Message and Description
Sending handheld
If you get an error when sending a folder to an
older TI-Nspire™ handheld, try updating the OS on
the receiving handheld. If the error persists, you
may have to send the files individually.
Sending handheld
This message is displayed if a cable is not attached
to the sending handheld’s link port. Remove and
then reinsert the cable and try the document
transmission again.
Select
OK to cancel the transmission message.
Note: The sending handheld may not always
display this message. Instead, it may remain BUSY
until you cancel the transmission.
“This folder structure is not
supported on the receiving
handheld. The receiving
handheld’s OS may need to
be updated, which you can
do by selecting Send OS
from the My Documents
menu.”
OK
“Transfer failed. Check cable
and try again.“
OK
To Next Page
Loading...
