Texi Fox 25 Service Manual

Texi Fox 25
17
MECHANICAL ADJUSTMENT
BARTACK FEED OF BUTTONHOLE
TO CHECK:
If the material is fed forward or backward when sewing bartack on buttonhole,
make an adjustment as follows:
ADJUSTMENT PROCEDURE:
1. Turn the pattern dial on “
”.
2. Remove the .face cover, top cover, base plate and front cover (See page 2-4)
3. Turn the adjusting screw.
Place a piece of paper under the foot and turn the handwheel.
If the paper is fed forward, turn the adjusting screw in the direction of (C).
If the paper is fed backward, turn the adjusting screw in the direction of (D).
4. Recheck the bartack of buttonhole
.
5. Attach the covers.
Adjusting screw
D
C
Backward feeding
Forward feeding
Stitch length dial

Texi Fox 25 Specifications

General

Brand	Texi
Model	Fox 25
Category	Sewing Machine
Language	English