Texi Fox 25
1
FACE COVER ------- -----------------------------------------------------------------------2
TOP COVER-------------------------------------------------------------------------------2
BASE PLATE------------------------------------------------------------------------------3
FRONT COVER---------------------------------------------------------------------------4
REAR COVER---------------------------------------
-------------------------------------5
TOP TENSION-----------------------------------------------------------------------------6
BOBBIN TENSION------------------------------------------------------------------------7
PRESSER BAR HEIGHT AND ALIGNMENT------------------------------------------8
NEEDLE SWING--------------------------------------------------------------------------9
NEEDLE DROP-------------------
-------------------------------------------------------10
CLEARANCE BETWEEN NEEDLE AND HOOK (ADJUSTMENT METHOD
NO.1)--------------------------------------------------------------------------------------11
CLEARANCE BETWEEN NEEDLE AND HOOK (ADJUSTMENT METHOD
NO.2)--------------------------------------------------------------------------------------12
FEED DOG HEIGHT---------------------------------------------------
-----------------13
NEEDLE HEIGHT------------------------------------------------------------------------14
NEEDLE TIMING TO SHUTTLE------------------------------------------------------15
FEED BALANCE ON STRETCH STITCH-------------------------------------------16
BARTACK FEED OF BUTTONHOLE-------------------------------------------------17
BUTTONHOLE FEED BALANCE-----------------------------------------------------
18
DISENGAGEMENT OF CAM FOLLOWER------------------------------------------19
FOOT PAD HEIGHT --------------------------------------------------------------------20
BOBBIN WINDING ----------------------------------------------------------------------21
AUTOMATIC THREADER POSITION------------------------------------------------22
MOTOR BELT TENSION---------------------------------------------------------------23
WIRING FOR SOCKET UNIT 24----------------------------------------------------------
1.DISASSEMBLY AND ASSEMBLY FOR COVER
2.MECHANICAL ADJUSTMENT
3.CAVEAT
CONTENTS
To Next Page
Loading...
Need help?
General
