Texi Fox 25 - Inserting Zippers and Piping; Button Sewing

Texi Fox 25
21
MECHANICAL ADJUSTMENT
BOBBIN WINDING
TO CHECK:
The bobbin winding volume should reach 80%-90%, and no uneven winding
surface.
If it is not within the above limit, adjust as follows:
ADJUSTMENT PROCEDURE:
1. Loosen the setscrew (A).
2. Turn the position limit block (B) to adjust the bobbin winding volume.
3. Tighten the setscrew (A).
4. Recheck.
* If the winding surface is uneven, adjust the height of the bobbin winding
adjusting unit (C).
Screw driver
Screw driver
C
B
A