Texi Fox 25 Service Manual

Texi Fox 25
6
TOP TENSION
TO CHECK
The top tension should be when pulling the thread up. (See between 70~90g
pic.1)
If it is not within the above limit, adjust as follows:
ADJUSTMENT PROCEDURE :
1. Remove the face cover, top cover, base plate and front cover (See page 2-4).
2. Set the tension dial at “4”. (See pic.2)
3. Lower the presser foot. (See pic.3)
4. Check the tension of top thread by a tension meter.
If the top tension is too loose, turn the nut (C) in the direction (A). (See pic.4)
If the top tension is too tight, turn the nut (C) in the direction (B). (See pic.4)
5. Recheck the top tension .
6. Attach the covers.
MECHANICAL ADJUSTMENT
pic.1
Tension meter
between 70~90g
Thread
Presser foot
pic.3
pic.4
Press shrapnel
to turn the nut
Shrapnel
A
B
C
pic.2
Groove
"4" should
be in line
with groove

Texi Fox 25 Specifications

General

Brand	Texi
Model	Fox 25
Category	Sewing Machine
Language	English