55
6.7. COMMAND SET DESCRIPTION
7.7.1 General guides
1. Any command or argument may be in capital letters or small letters.
2. In commands with an argument, a space must be between the command and the argument.
3. For any command that sets a numeric value, the value may be up to 12 characters long.
4. Carriage Return: If the CR character (ASCII 13) is received by itself, the power supply will
respond with "OK" and CR.
7.7.2 Command set categories
The PU1500W series command set is divided into four categories as follows:
1. Initialization control
2. ID control
3. Output control
4. Status control
To Next Page
