EasyManua.ls Logo

Teze TW-EOR48 - Product Instructions and Safety; How to Use This Manual; Symbols in This Manual; Safety Instructions

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Add: Building A, Xinlida Industrial Park, Junzibu Village,Guanlan Street, Longhua District ,Shenzhen,
Guangdong
TEL :0755-23225527 FAX:0755-23225537
7
1. Instruction
1.1 How to use this manual
This manual contains important information guidelines operation and maintenance for the
following products TEZE-AO-MB51300-AC380V-10KW-EU, TEZE-AO-MB51400-AC380V-
10KW-EU
The manual must be followed during installation and maintenance.
1.2 Symbols in this manual
Symbol
Description
DANGER indicates a hazardous situations which
if not avoided will result in death or serious
injury.
WARING indicates a hazardous situations which
if not avoided could result in death or serious
injury.
CAUTION indicates a hazardous situations which
if not avoided could result in minor or moderate
injury.
NOTICE provide some tips on operation of
products.
1.3 Safety instructions
This chapter contains important safety instructions. Read and keep this manual for future
reference.
Be sure to comply the local requirements and regulation to install this inverter.
Beware of high voltage. Please turn off the switch of each power sources before and during the
installation to avoid electric shock.
For optimum operation of this product, please follow required specification to select
appropriate cable size and necessary protective device.
Do not connect or disconnect any connections when the inverter is working.
Do not open the terminal cover when the inverter working.
Make sure the inverter is well grounding.
Never cause AC output and DC input short circuited.
Do not disassembly this unit, for all repair and maintenance, please take it to the professional
service center.
Never charge a frozen battery.
Please keep children away from touching or mishandling the inverter.
Please make sure that this inverter is the only input power source for the load, do not use it in
parallel with other input AC power sources to avoid damage.