Thales ADS-B - Page 143

AS 680/682
Description, Operation and Maintenance Display Configuration Tool
ADS−B
4−43Ed. 10.07
4.5.7.3 Refltf Parameters
The parameter panel RefItf, see Fig. 4−68, contains parameters concerning the reference Asterix in-
terface, meaning the Asterix interface used, when starting the Technical Situation Display. Its parame-
ters can be overwritten, when the configuration is saved in the Technical Situation Display.
S Incoming Interface:
Displays the host name or the IP address of the ASTERIX interface that is opened, when the Techni-
cal Situation Display is started.
S Incoming port:
Displays the port of the ASTERIX interface that is opened, when the Technical Situation Display
is started.
Fig. 4−68 Parameters Refltf (example)
4.5.7.4 ltfParameter Parameters
The node Interface contains a list of ItfParameters, see Fig. 4−69, giving the available Asterix Inter-
faces, which can be selected in the Interface Panel, refer to section 4.4.2.6.5 , of the Technical Situa-
tion Display.
S Incoming Interface:
Displays the host name or IP address of an available ASTERIX interface.
S Incoming port:
Displays the port of an ASTERIX interface.
Fig. 4−69 Parameters ltfParameters (example)