AS 680/682
Record and Replay Description, Operation and Maintenance
ADS−B
4−72 Ed. 10.07
Example:
IN #000001: 096 005 26702.961 26702.961 8054.460492031 17 AB00D6 8DAB00D620397075C60820000000 −− −−
MSG PART DL FORMAT [1.BYTE: 01−05]: 17
MSG PART CF/CA [1.BYTE: 06−08]: 5
MSG PART TARGET ADDRESS [2. − 4.BYTE ]: AB00D6 (hex)
MSG PART START 5.BYTE [01−56]: 20 39 70 75 C6 08 20 00 00 00
FORMAT TYPE CODE [01−05]: 4
AIRCRAFT CATEGORY [06−08]: 0
AIRCRAFT IDENTIFICATION [09−56]: NWA51
CHARACTER 1 [09−14]: 28
CHARACTER 2 [15−20]: 7
CHARACTER 3 [21−26]: 23
CHARACTER 4 [27−32]: 6
CHARACTER 5 [33−38]: 2
CHARACTER 6 [39−44]: 2
CHARACTER 7 [45−50]: 0
CHARACTER 8 [51−56]: 0
NOTE: Altitude is invalid or out of range!
NOTE: Allocated new track!
’Screen Output’ can be saved and edited by the user (refer to section 4.6.2.2.2 ).
4.6.5.1.3 RAC I/O Parameter: Pipeline Mode
A checkbox allows to switch the pipeline mode. If the pipeline mode is activated, the RAC−tool works
like the groundstation’s pipeline mode.
Pipeline mode means that telegrams are only sent, if the input is a position or a velocity squitter, i.e.
every other kind of squitter does not generate output.
S In pipeline mode, only the current information of the position or velocity squitter is kept, respec-
tively, and additionally the information of the last identification or status squitter received since the
last output.
S Pipeline mode means that the mandatory field check, refer to 4.6.5.4, is disabled to prevent the
loss of velocity squitter generated output not containing mandatory position information.
S If the pipeline mode is switched off, every telegram generates output telegrams containing all infor-
mation being up to date. The ages of the information, refer to 4.6.5.3, decide which information
is up to date and which information is obsolete.
To Next Page
Loading...