Thermo Scientific APEX 100 User Manual

Page 106 Thermo Scientific APEX User’s Guide
4) Press the right-navigation button to highlight the “Full Product Calibration” menu.
Full Product Calibration
The detector’s auto-calibration function (as shown by the symbols and check marks in
the screen above) is now ready to do the following.
• Learn the phase angle
• Learn the detect level
• Conduct an AuditCheck, if this optional hardware is installed on your APEX.
5) Press the Go button and the “Performing Full Learn” monitor screen appears.
Performing Full Learn
(continued…)

Thermo Scientific APEX 100 Specifications

General

Brand	Thermo Scientific
Model	APEX 100
Category	Metal Detector
Language	English