Thermo Scientific APEX 100 User Manual

Thermo Scientific APEX User’s Guide Page 241
Activating the Printer
Once the printer is attached to the detector, before you can print, you must first activate
the printer. Note that, once you have activated the printer, whenever you change
products or change various functions, a print will occur.
1) Follow steps 1–6 in the section above to reach page 1 of the printer set-up menu.
Printer Setup Page 1
2) Navigate to the activate-printer function.
Activate Printer
Note: The X shows that the printer is currently inactivated.
3) Press the Go button and the X changes to a check mark. The printer is now activated
and ready to print.
4) Press the Back button to exit the menu.

Thermo Scientific APEX 100 Specifications

General

Brand	Thermo Scientific
Model	APEX 100
Category	Metal Detector
Language	English