Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
120
Ping tests and results To start/stop a ping test:
1 Select the ping test entry.
2 Click:
Activate to start the ping test.
Deactivate a ping test that is currently running.
To view the results of the ping test:
1 Select the ping test entry, if needed.
2 Click Result.
To overview a history of ping tests:
1 Select the ping test entry.
2 Click History.
Traceroute The Traceroute table provides a list of configured traceroute test entries.
By default no traceroute tests are configured. To add a traceroute test see Add/
delete a traceroute test below.
Per traceroute test entry following information is shown in the table:
an intuitive Test name of the traceroute Test
the traceroute test entry Owner
the traceroute Target Address (host or IP address)
the traceroute test Status, being either:
Stopped
In Progress
Select a traceroute test entry to:
Modify traceroute test properties.
Perform a traceroute test and view test results and history (see traceroute tests
and results).
Delete the entry (see Add/delete a traceroute test).
To Next Page
Loading...
