THOMSON SpeedTouch 605 - Page 131

Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
121
Add/delete a
traceroute test
To add a traceroute test entry:
1 Click New (if an entry is currently selected, click Cancel first).
2 Type a name for the traceroute test entry.
3 Type the host name or IP address of the target to traceroute.
4 Click Apply.
To delete a traceroute test:
1 Select the traceroute test entry to delete.
2 Click Delete.
Modify traceroute test
properties
To modify a traceroute test entry:
1 Select the traceroute test entry.
2 Click Modify.
3 Make your changes.
4 Click Apply to apply your changes to the traceroute test entry.
traceroute tests and
results
To start/stop a traceroute test:
1 Select the traceroute test entry.
2 Click:
 Activate to start the traceroute test.
 Deactivate a traceroute test that is currently running.
To view the results of the traceroute test:
1 Select the traceroute test entry, if needed.
2 Click Result.
To overview a history of traceroute tests:
1 Select the traceroute test entry.
2 Click History.
To view a list of hops that have been reached by the traceroute request:
1 Select the traceroute test entry.
2 Click Hop.