Chapter 10
Routed PPPoI
E-DOC-CTC-20051017-0167 v1.0
94
CLI Parameters: The table below provides a description of the relevant parameters:
Parameter Value Description
intf text string name of the ISDN interface
number numeric Dial-in number for the ISDN line
mlppp enabled or disabled Enable or disable multilink ppp. This
means that the ppp can be
established over 1 or 2 ISDN B links
(64 kbps), thus creating a bandwidth
of either 64 or 128 kbps
BODStart Numerical (in kbps)
Default: 40
If multilink ppp is enabled and the
required bandwidth exceeds this
value, a second ISDN B link is used
for the ppp connection
BODEnd Numerical (in kbps)
Default: 38
If multilink ppp is enabled and the
required for it drops below this
value, the second ISDN B link in the
ppp connection is dropped.
mode dialout SpeedTouch™is set for dialout. This
value is mandatory.
callback enabled or disabled Enable or disable callback. Note that
the called party must also be set to
support callback.
To Next Page
Loading...
