Chapter 3
Routed Ethernet
E-DOC-CTC-20051017-0167 v1.0
21
The Ethernet interface Proceed as follows to create, configure and attach/connect the Ethernet interface:
1 Create a new Ethernet interface with name RtEthoa_eth.
2 Configure the new Ethernet interface with as destination the ATM interface
created above.
3 Connect the Ethernet interface.
=>eth ifadd intf=RtEthoa_eth
=>
=>eth ifconfig intf=RtEthoa_eth dest=RtEthoa_atm
=>
=>eth ifattach intf=RtEthoa_eth
=>
To Next Page
Loading...
