range is "-11:30 ~ +12:00", increasing by half hours progressively.
The cities matching the set GMT Offset are displayed at the
bottom of the screen.
Daylight Saving: Select Off or On to add one hour extra for summer time during
the summer.
Date: Date and Time settings are available only when GMT Usage
is set to Off. Use the buttons to enter the date. Press
to proceed.
Time: Date and Time settings are available only when GMT Usage
is set to Off. Use the buttons to enter the time. Press
to proceed.
Time Display Select On to display time on screen, Off to remove.
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the
timer you wish to set or change with pq and press to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off (Timer inactive), Once, Daily (Timer will be
executed every day, same time) or Weekly (Timer will be executed
every week, same day, same time) and Monthly (Timer will be
executed every month, same day, same time).
Timer Service: Choose between Channel (Timer will wake up the receiver) or
Record (Timer will start to record the scheduled event).
Wakeup Channel: Use tu to select the channel the timer will wake up with.
Wakeup Date: Use the buttons to input the date for the timed event.
Wakeup Time: Use the buttons to input the start time.
Duration: Use the buttons to input the timer duration.
When all settings are according to your wishes, use pq to move the highlight to Save
and press to conrm. To quit the timer without saving your settings, move the highlight
to Cancel.
This menu allows you to protect the installation menu and/or channels with a PIN code. You
can also enter a new PIN code in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press to proceed.
You will be asked to enter your PIN code.
Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off.
Parental Rating: Choose between: Off, 4 years and up to 18 years. Channels with
a parental rating above the chosen age will be protected with a
PIN code (if available in your local broadcast.)
New Password: Enter your new PIN code (4 digits) here.
Conrm Password: Re-enter your PIN code here to conrm.
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
To Next Page
Loading...
