Press to access slideshow settings. You can change the slide
time and slideshow repetition.
Press to show the les in a preview of 3x3 pictures.
One step back or leave the folder and quit the function.
This option shows relevant information about the connected USB device. In this menu you
can also format your USB storage device and setup the recording type.
Select HDD Information in the Media menu and press to enter.
Now you will see all details as Free and used Recoding Sizes and used le system.
Press the button Format to format the connected USB device.
Please, enter your PIN code to access this menu and press to start formatting.
Formatting will permanently delete ALL data stored on the
connected device. Please make a backup copy of all data you
wish to keep before entering the HDD Format menu. THOMSON
cannot be held responsible for loss of data from USB devices
used with this receiver.
Press to proceed, select FAT or Cancel, or press
to leave without formatting.
It is possible to use USB storage devices already formatted
in NTFS.
Press
to leave this menu.
This menu allows you to congure settings for Timeshift, recording and playback.
Select DVR Setting in the Media menu and press to enter.
Use pq to move the highlight and tu to change settings.
Timeshift: Select between Auto, Pause or Off. When Timeshift is set to Auto
it will automatically start every time after tuning to a channel.
When Timeshift is set to Pause it will start only after pressing the
2 button. Select Off to deactivate Timeshift.
Step to: 30 sec to 30 min. Set the time step you like to jump forward by
pressing during playback of recorded les. This will only work
when the info banner is displayed on screen. If it is not, press .
Time Shift to Record: If set to On the timeshifted part will be included in your recording
when you start to record the current programme.
PS Record: Select between On or Off. When Off is selected, recordings will
also include subtitles and Teletext (when available). Record to PS
mode On allows recordings without these extras which will need
less space on your USB device.
Press to leave this menu.
Select Remove USB device safely from the tools menu and press . The receiver
will display a message indicating that you can safely remove your storage device from
the receiver.
To Next Page
Loading...
