© 2013 Thorlabs GmbH
4 Programming (SDK)
185
pParam: Pointer to a UINT variable,
IS_CONFIG_INITIAL_PARAMETERSET_NONE
IS_CONFIG_INITIAL_PARAMETERSET_1
IS_CONFIG_INITIAL_PARAMETERSET_2
nSizeOfParam: 4
Pointer to a function parameter, whose function depends
on nCommand.
Size (in bytes) of the memory area to which pParam
refers.
Contents of the CONFIGURATION_CAPS Structure
IS_CONFIG_CPU_IDLE_STATES_CAP_SUPPORT
ED
Function parameters for setting the processor
operating states are supported.
IS_CONFIG_OPEN_MP_CAP_SUPPORTED
Function parameters to configure OpenMP are
supported.
IS_CONFIG_INITIAL_PARAMETERSET_CAP_SU
PPORTED
Function parameters to load camera parameters
during initialization are supported.
Contents of the CONFIGURATION_SEL Structure
IS_CONFIG_CPU_IDLE_STATES_BIT_AC_VALU
E
Set/recover processor operating states for power
supply unit operation
IS_CONFIG_CPU_IDLE_STATES_BIT_DC_VALU
E
Set/recover processor operating states for battery
operation
IS_CONFIG_OPEN_MP_DISABLE
IS_CONFIG_INITIAL_PARAMETERSET_NONE
Load camera parameters during initialization
disabled
IS_CONFIG_INITIAL_PARAMETERSET_1
Load camera parameter set 1 during initialization
IS_CONFIG_INITIAL_PARAMETERSET_2
Load camera parameter set 2 during initialization
Return values
Error opening a Windows registry key
Error reading settings from the Windows registry
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
The configuration of the CPU idle has failed.
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
IS_NO_IMAGE_MEM_ALLOCATED
The driver could not allocate memory.
The camera model used here does not support this
function or setting.
IS_OPERATING_SYSTEM_NOT_SUPPORTED
Operating system not supported
Function executed successfully
Related functions
is_ParameterSet()
187
292