THORLABS DCU223x User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
261
hCam
Camera handle
IS_HOTPIXEL_ENABLE_SOFTWARE_USER_CORRECTI
ON: Hot pixel correction is possible via the user-defined
hot pixel list.
IS_HOTPIXEL_ENABLE_SENSOR_CORRECTION: Hot
pixel correction is possible via the sensor-internal hot
pixel correction.
IS_HOTPIXEL_GET_SOFTWARE_USER_LIST_EXIS
TS
Indicates whether the user-defined hot pixel list exists in
the computer (Example 3 )
IS_HOTPIXEL_GET_SOFTWARE_USER_LIST_NUMB
ER
Returns the number of hot pixels in the user-defined hot
pixel list stored in the computer.
IS_HOTPIXEL_GET_SOFTWARE_USER_LIST
Returns the user-defined hot pixel list stored in the
computer.
IS_HOTPIXEL_SET_SOFTWARE_USER_LIST
Sets the user-defined hot pixel list that is stored in the
computer.
IS_HOTPIXEL_SAVE_SOFTWARE_USER_LIST
IS_HOTPIXEL_SAVE_SOFTWARE_USER_LIST_UNI
CODE
Saves the user-defined hot pixel list to a file. The function
can also be used with Unicode file names. (Example 4 )
IS_HOTPIXEL_LOAD_SOFTWARE_USER_LIST
IS_HOTPIXEL_LOAD_SOFTWARE_USER_LIST_UNI
CODE
Loads the user-defined hot pixel list from a file. The
function can also be used with Unicode file names.
IS_HOTPIXEL_GET_CAMERA_FACTORY_LIST_EXI
STS
Indicates whether the factory-set hot pixel list exists.
IS_HOTPIXEL_GET_CAMERA_FACTORY_LIST_NUM
BER
Returns the number of hot pixels in the factory-set hot
pixel list.
IS_HOTPIXEL_GET_CAMERA_FACTORY_LIST
Returns the factory-set hot pixel list.
IS_HOTPIXEL_GET_CAMERA_USER_LIST_EXISTS
Indicates whether the user-defined hot pixel list exists in
the camera EEPROM.
IS_HOTPIXEL_GET_CAMERA_USER_LIST_NUMBER
Returns the number of hot pixels in the user-defined hot
pixel list stored in the camera EEPROM.
IS_HOTPIXEL_GET_CAMERA_USER_LIST
Returns the user-defined hot pixel list stored in the
camera EEPROM.
IS_HOTPIXEL_SET_CAMERA_USER_LIST
Sets the user-defined hot pixel list stored in the camera
EEPROM (Example 5 )
IS_HOTPIXEL_DELETE_CAMERA_USER_LIST
Deletes the user-defined hot pixel list from the camera
EEPROM.
IS_HOTPIXEL_GET_CAMERA_USER_LIST_MAX_NU
MBER
Returns the maximum number of hot pixels that the user
can store in the camera EEPROM.
IS_HOTPIXEL_GET_MERGED_CAMERA_LIST_NUMB
ER
Returns the number of hot pixels in a merged list that
combines the entries from the factory-set hot pixel list with
those of the user-defined hot pixels list stored in the
camera EEPROM.
IS_HOTPIXEL_GET_MERGED_CAMERA_LIST
Returns the merged list (Example 6 )
pParam
Pointer to a function parameter, whose function depends
on nCommand.
nSizeOfParam
Size (in bytes) of the memory area to which pParam
refers.
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not match
262
263
263
263

THORLABS DCU223x Specifications

General

Brand	THORLABS
Model	DCU223x
Category	Security Camera
Language	English