© 2013 Thorlabs GmbH274
DCx Cameras
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
Error opening a Windows registry key
Error reading settings from the Windows registry
A capturing operation is in progress and must be
terminated before you can start another one.
A CRC error-correction problem occurred while reading
the settings.
The device is already paired.
The device is not compatible to the drivers.
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not be
created.
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
The DirectRenderer library could not be found.
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
The configuration of the CPU idle has failed.
File cannot be opened for writing or reading.
Because of other incompatible settings the function is
not possible.
The image memory has an inappropriate size to store
the image in the desired format.
The camera type defined in the .ini file does not match
the current camera model.
The function can not be executed in the current camera
operating mode (free run, trigger or standby).
The device ID is invalid. Valid IDs start from 1 for USB
cameras.
This setting is not available for the currently set
exposure time.
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
This setting is not available for the currently set pixel
clock frequency.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
No active image memory available. You must set the
memory to active using the is_SetImageMem()
function or create a sequence using the
is_AddToSequence() function.
IS_NO_IMAGE_MEM_ALLOCATED
The driver could not allocate memory.
The camera does not contain any calibration data.