THORLABS DCU223x User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
295
Related functions
is_GetFramesPerSecond()
is_GetFrameTimeRange()
is_Exposure()
is_SetOptimalCameraTiming()
is_SetFrameRate()
is_SetAutoParameter()
is_SetBinning()
is_SetSubSampling()
is_AOI()
Example 1
UINT nNumberOfSupportedPixelClocks = 0;
INT nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_GET_NUMBER,
(void*)&nNumberOfSupportedPixelClocks,
sizeof(nNumberOfSupportedPixelClocks));
if ((nRet == IS_SUCCESS) && (m_nNumberOfSupportedPixelClocks > 0))
{
// No camera has more than 150 different pixel clocks.
// Of course, the list can be allocated dynamically
UINT nPixelClockList[150];
ZeroMemory(&nPixelClockList, sizeof(nPixelClockList));
nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_GET_LIST,
(void*)nPixelClockList,
nNumberOfSupportedPixelClocks * sizeof(UINT));
}
Example 2
UINT nRange[3];
ZeroMemory(nRange, sizeof(nRange));
// Get pixel clock range
INT nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_GET_RANGE, (void*)nRange, sizeof(nRange));
if (nRet == IS_SUCCESS)
{
UINT nMin = nRange[0];
UINT nMax = nRange[1];
UINT nInc = nRange[2];
}
Example 3
UINT nPixelClock;
// Get current pixel clock
nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_GET, (void*)&nPixelClock, sizeof(nPixelClock));
Example 4
UINT nPixelClockDefault;
// Get default pixel clock
INT nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_GET_DEFAULT,
(void*)&nPixelClockDefault, sizeof(nPixelClockDefault));
if (nRet == IS_SUCCESS)
{
// Set this pixel clock
nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_SET,
(void*)&nPixelClockDefault, sizeof(nPixelClockDefault));
}
240
241
216
338
329
303
310
347
159

THORLABS DCU223x Specifications

General

Brand	THORLABS
Model	DCU223x
Category	Security Camera
Language	English