© 2013 Thorlabs GmbH306
DCx Cameras
pval1: returns the minimum permitted value
pval2: returns the maximum permitted value
Sets the hysteresis value for auto exposure shutter and
auto gain control.
Control parameters
pval1: defines the hysteresis value (default: 2)
Returns the hysteresis value for auto exposure shutter
and auto gain control.
Control parameters
pval1: returns the current setting
IS_GET_AUTO_HYSTERESIS_RANGE
Returns the permissible range for the hysteresis value.
Control parameters
pval1: returns the minimum permitted value
pval2: returns the maximum permitted value
Photometric settings for auto gain control/auto exposure shutter
IS_SET_SENS_AUTO_SHUTTER_PHOTOM
Sets the photometry mode for auto exposure shutter.
Control parameters
pval1: defines which fields of view are used for auto
exposure shutter (see is_GetAutoInfo() ):
AS_PM_NONE
AS_PM_SENS_CENTER_WEIGHTED
AS_PM_SENS_CENTER_SPOT
AS_PM_SENS_PORTRAIT
AS_PM_SENS_LANDSCAPE
IS_GET_SENS_AUTO_SHUTTER_PHOTOM
Returns the photometry mode for auto exposure shutter.
Control parameters
pval1: returns the current setting
IS_GET_SENS_AUTO_SHUTTER_PHOTOM_DEF
Returns the default photometry mode for auto exposure
shutter.
Control parameters
pval1: returns the default
IS_SET_SENS_AUTO_GAIN_PHOTOM
Sets the photometry mode for auto gain control.
Control parameters
pval1: defines which fields of view are used for auto
gain control (see is_GetAutoInfo() ):
AG_PM_NONE
AG_PM_SENS_CENTER_WEIGHTED
AG_PM_SENS_CENTER_SPOT
AG_PM_SENS_PORTRAIT
AG_PM_SENS_LANDSCAPE
IS_GET_SENS_AUTO_GAIN_PHOTOM
Returns the photometry mode for auto gain control.
Control parameters
pval1: returns the current setting
IS_GET_SENS_AUTO_GAIN_PHOTOM_DEF
Returns the default photometry mode for auto gain
control.
Control parameters
pval1: returns the default
Adjusting auto white balance
Sets the offset values for the red and blue channels.
227
227
To Next Page
Loading...
Need help?
General
