© 2013 Thorlabs GmbH312
DCx Cameras
(uc480_usb.sys) do not match.
No active image memory available. You must set the
memory to active using the is_SetImageMem()
function or create a sequence using the
is_AddToSequence() function.
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
No memory could be allocated.
IS_SEQUENCE_BUF_ALREADY_LOCKED
The memory could not be locked. The pointer to the
buffer is invalid.
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
The function cannot be used because the camera is
waiting for a trigger signal.
Related functions
is_SetSubSampling()
is_AOI()
is_SetImagePos()
is_PixelClock()
347
159
435
294