THORLABS DCU223x User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
455
No
Error
Description
125
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or is
not available in this mode.
127
IS_OUT_OF_MEMORY
No memory could be allocated.
129
IS_ACCESS_VIOLATION
An internal error has occured.
139
IS_NO_USB20
The camera is connected to a port which does not
support the USB 2.0 high-speed standard.
Cameras without a memory board cannot be
operated on a USB 1.1 port.
140
IS_CAPTURE_RUNNING
A capturing operation is in progress and must be
terminated before you can start another one.
145
IS_IMAGE_NOT_PRESENT
The requested image is not available in the camera
memory or is no longer valid.
148
IS_TRIGGER_ACTIVATED
The function cannot be used because the camera is
waiting for a trigger signal.
151
IS_CRC_ERROR
A CRC error-correction problem occurred while
reading the settings.
152
IS_NOT_YET_RELEASED
This function has not been enabled yet in this
version.
153
IS_NOT_CALIBRATED
The camera does not contain any calibration data.
154
IS_WAITING_FOR_KERNEL
The system is waiting for the kernel driver to
respond.
155
IS_NOT_SUPPORTED
The camera model used here does not support this
function or setting.
156
IS_TRIGGER_NOT_ACTIVATED
The function is not possible as trigger is disabled.
157
IS_OPERATION_ABORTED
The dialog was canceled without a selection so that
no file could be saved.
158
IS_BAD_STRUCTURE_SIZE
An internal structure has an incorrect size.
159
IS_INVALID_BUFFER_SIZE
The image memory has an inappropriate size to
store the image in the desired format.
160
IS_INVALID_PIXEL_CLOCK
This setting is not available for the currently set
pixel clock frequency.
161
IS_INVALID_EXPOSURE_TIME
This setting is not available for the currently set
exposure time.
162
IS_AUTO_EXPOSURE_RUNNING
This setting cannot be changed while automatic
exposure time control is enabled.
163
IS_CANNOT_CREATE_BB_SURF
The BackBuffer surface cannot be created.
164
IS_CANNOT_CREATE_BB_MIX
The BackBuffer mix surface cannot be created.
165
IS_BB_OVLMEM_NULL
The BackBuffer overlay memory cannot be locked.
166
IS_CANNOT_CREATE_BB_OVL
The BackBuffer overlay memory cannot be created.
167
IS_NOT_SUPP_IN_OVL_SURF_MODE
Not supported in BackBuffer Overlay mode.
168
IS_INVALID_SURFACE
Back buffer surface invalid.
169
IS_SURFACE_LOST
Back buffer surface not found.
170
IS_RELEASE_BB_OVL_DC
Error releasing the overlay device context.
171
IS_BB_TIMER_NOT_CREATED
The back buffer timer could not be created.
172
IS_BB_OVL_NOT_EN
The back buffer overlay was not enabled.
173
IS_ONLY_IN_BB_MODE
Only possible in BackBuffer mode.
174
IS_INVALID_COLOR_FORMAT
Invalid color format
175
IS_INVALID_WB_BINNING_MODE
Mono binning/mono sub-sampling do not support
automatic white balance.

THORLABS DCU223x Specifications

General

Brand	THORLABS
Model	DCU223x
Category	Security Camera
Language	English