THORLABS LDC200C series User Manual

© 2015 Thorlabs
5 Appendix
25
5.1.1 LDC200CV
Current Control (Constant Current Mode)
Control Range
0 to ±20 mA
Compliance Voltage
>6 V
Resolution
1.0 µA
Accuracy
±20 µA
Noise Without Ripple (10Hz to 10MHz, rms, typ.)
<1.0 µA
Ripple (50/60Hz, rms, typ.)
<0.5 µA
Transients (typ.)
<10 µA
Drift, 24hours
(typ., 0-10Hz, at constant ambient temperature)
<1 µA
Temperature Coefficient
<50 ppm/°C
Current Limit
Setting Range
0 to >20 mA
Resolution
1 µA
Accuracy
± 50 µA
Power Control (Constant Power Mode)
Photo Current Control Range
5 µA to 2 mA
Photo Current Resolution
0.1 µA
Photo Current Accuracy
±2 µA
Analog Modulation Input
Input Resistance
10 kW
Small Signal 3dB Bandwidth, CC Mode
DC to 100 kHz
Modulation Coefficient, CC Mode
2 mA/V ±5%
Modulation Coefficient, CP Mode
0.2 mA/V ±5%
Laser Current Monitor Output
Load Resistance
>10 kW
Transmission Coefficient
500 V/A ±5%
General data
Maximum Power Consumption
20 VA
Weight
<3.1 kg
All technical data are valid at 23 ± 5°C and 45 ±15% humidity

THORLABS LDC200C series Specifications

General

Brand	THORLABS
Model	LDC200C series
Category	Controller
Language	English