© 2017 Thorlabs GmbH
3 Operating Instruction
27
Submenu Measurement
·
Sensor-dependent content
·
Adjust common settings (mode, wavelength, attenuation, displayed measurement units,
ranging, display resolution and update rate, etc.)
·
Enter beam parameters (shape, type and diameter)
·
Adjust settings of the sensor-internal temperature sensor
·
Select type of custom sensor, if used
Submenu System Info
Submenu Sensor Info
Submenu File Manager
·
Manage files in the Flash memory
Button Memory Owner
·
Assign the Flash memory access between PM400 or a connected via USB PC
To Next Page
Loading...
