© 2017 Thorlabs GmbH
1 General Information
5
1.2 Ordering Codes and Accessories
Handheld Power / Energy Meter Console
Included Accessories
·
BNC-to-3.5-mm adapter for Analog output
·
USB cable A to Mini-B
Optional Accessories
·
PM400-PMA post-mount adapter – fix to back with two M3 screws
·
PM400-AUX adapter card with GPIO ports and a sensor for ambient temperature and
relative humidity measurement.
·
TSP-TH external NTC (thermistor temperature sensor)
Please visit our homepage http://www.thorlabs.com for various accessories like fiber adapters,
posts and post holders, data sheets and further information.
1.3 Requirements
These are the requirements to the PC intended to be used for remote operation of the PM400.
Hardware Requirements
CPU: 1 GHz or higher
RAM: 256 MB
Graphic card Min. 32 MB memory
Hard disc Min 100 MB free storage space
Interface free USB2.0 port, USB cable according the USB 2.0 specification
Software Requirements
The PM400 software is compatible with the following operating systems:
·
Windows
®
XP (32-bit) SP3
·
Windows
®
Vista (32-bit, 64-bit)
·
Windows
®
7 (32-bit, 64-bit)
·
Windows
®
8.1 (32-bit, 64-bit)
·
Windows
®
10 (32-bit, 64-bit)
For operation of the PM400, also an NI-VISA (version 5.4. or higher) is required. This NI-VISA
engines comes with the Thorlabs GmbH PM400 installation package, but can be downloaded
also from National Instruments' website www.ni.com. A LabVIEW Engine 2015 is included as
well.
To Next Page
Loading...
