THORLABS PM400 - Default Chapter; Table of Contents

Foreword
Contents
3
1 General Information 4
41.1 Safety
51.2 Ordering Codes and Accessories
51.3 Requirements
2 Getting Started 6
62.1 Parts List
62.2 Operating Elements
82.3 Installing Software
3 Operating Instruction 17
173.1 Measurement Screens
203.2 Measurement Configuration
213.3 Spectral Correction
223.4 Delta Mode
223.5 Zeroing
233.6 Attenuation Correction
243.7 Data Handling
253.8 Subpanels
263.9 Main Menu
283.10 Charging the Battery
283.11 Analog and Auxiliary I/O
4 Computer Interface 29
294.1 PM400 Utility Software
324.2 Using the Instrument Drivers
5 Write Your Own Application 33
345.1 Windows XP 32bit
355.2 Windows Vista / 7 / 8 - 32bit
365.3 Windows Vista / 7 / 8 - 64bit
385.4 Simple LabVIEW Example using SCPI commands
425.5 SCPI Commands
425.5.1 An Introduction to the SCPI language
455.5.2 IEEE488.2 Common Commands
455.5.2.1 Command Summary
465.5.2.2 Command Reference
475.5.2.3 PM400 specific SCPI Command Reference
6 Maintenance and Service 54
546.1 Version Information