THORLABS PM400 - Page 59

© 2017 Thorlabs GmbH
7 Appendix
57
Voltage Input (Pyro Sensors)
Connector
DB9F
Units
J, J/cm², W, W/cm², V
Measurement Ranges
4 Ranges: 200 mV - 2V - 20 V - 100 V
Ranges Selectable in J, Sensor Dependent
Display Resolution
100 µV / Responsivity Value (V/J)
AD Converter
16 bit
Accuracy
± 0.5% f.s.
Trigger Threshold
3% - 90% f.s.
Max. Repetition Rate
3 kHz
Wavelength Correction
Sensor Dependent [nm, V/J]
Beam Area Setting
Diameter 1/e² or Rectangular x,y
Analog Output
Connector
2p Audio 3.5 mm (Adapter to BNC included)
Signal
Amplified Input Signal - Not Corrected
Voltage Range
0 to 2 V
Accuracy
±3%
Bandwidth
up to 100 kHz, Dependent on Sensor and Settings
Auxiliary In-/Output
Connector
2 x 7 Pins, 0.1" Socket, Top Side
Function
4 x GPIO
2 x 10 bit ADC for external temperature, rel. humidity sensor
+3.3 V, +/- 2.5 V (100 mA max.)
Temperature Sensor Internal to C-Series Optical Sensors
Supported Temperature Sensor
Thermistor
Temperature Measurement Range
-10 °C to +80 °C
External Temperature Sensor
Supported Temperature Sensor
Thermistor NTC 0.1 – 100 kΩ, B-Value 1000 – 9999 K
Temperature Measurement Range
-10 °C to +80 °C (w. TSP-TH)
Connector
3P Audio 2.5 mm
Sound
Type
Speaker
Function
Laser Tuning Support, Console Function Support
Memory
Type
Nand Flash
Size
4 GB
Interfaces
Type
USB2.0
Connector
Mini-B USB