Basic Operation
Press button to select Picture Mode, then press Enter button to enter sub-menu.
Press button to select. (Available Picture mode: Dynamic, Standard, Mild, Personal ).
You can change the value of contrast, brightness, color and sharpness when the picture is in Personal mode.
Picture Mode
Contrast/ Brightness/ Colour/ Tint/ Sharpness
Press button to select option, then press Enter button to enter sub-menu.Press button to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Brightness Adjust the optical fiber output of the entire picture, it will effect the dark region of the picture.
Colour Adjust the saturation of the color based on your own like.
Tint Use in compensating color changed with the transmission in the NTSC code.
Sharpness Aadjust the peaking in the detail of the picture.
Color Temp Increase or reduce warm color of the picture personally(red),and the cool color
personally(blue) according to your like.
Cool Increase the blue tone for the white,
Normal Increase the sex-linked colors for the white,
Warm Increase the red color for the white.
Press MENU button to display the main menu.on the remote control
Press button on the remote control to select PICTURE in the main menu.
Picture Menu
1. Press button on the remote control to select the option that you want to adjust in the PICTURE menu.
2. Press Enter button on the remote control to adjust.
3. After finishing your adjustment, Press MENU button to save and return back to the previous menu.
Noise Reduction Set options to reduce video noise. Only VGA/HDMI is not available.
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
/
/
/
/
/
/
21
To Next Page
Loading...
