EasyManua.ls Logo

Thorn security LT42THL3DS1 - Installation; Power; Antenna; Location

Thorn security LT42THL3DS1
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
Power
This set operates on an AC main supply the voltage is indicated on the label on the back cover of unit.
In the event of thunderstorms or powercuts, please pull out the antenna and mains plugs until the
weather settles.
Warning
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the LCD
with anything hard as this may scratch, mark, or damage the Active LCD permanently.
Caution
Antenna
Location
Position your set s o that no b right light or s unlight falls directly o nto the screen. Care should be t aken not to
expose the set to any unnecessary vibration,moisture,dust or heat. A lso ensure that the se t is placed in a
position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
Cleaning
Do not attempt to repair, disassemble or modify this product yourself as opening or removing covers may
expose you to the risk of electric shock or other hazards. There are no user-serviceable parts inside.
Repairs should only be performed by qualified personnel in order to avoid a hazard.
This appliance should be connected to an antenna.
1. Unplug the power cord from the mains outlet before connecting or disconnecting the antenna.
2. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system
is grounded so as to provide some protection against voltage surges and built-up static charges.
3. Connect the RF Coaxial Antenna Cable (75 ohm) (not included) to the socket marked with ATV/DTV
Tuner on the rear panel of unit.
4. Connect the antenna cable to the wall antenna socket or jack.
5. For optimum picture quality, adjust the external antenna direction if needed or seek advice from your
local antenna installation expert.
- Always turn off the unit and unplug the power cord before cleaning the unit.
- Use a soft dry cloth to clean the unit. Never use harsh abrasives, cleaners when cleaning this appliance.
- Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through
openings.
- Clean the screen with a soft, dry cloth only. Do not use substances such as household cleaning agents
as these may damage the screen.
- Do not touch, push, rub or strike the screen with hard objects as this may damage the screen
permanently.
Accessories:
Owner's Manual Remote Control 2*AAA batteries 2*glasses

Related product manuals