21
Note
● The Timer function is not available in the following
cases.
• When the “Quick”, “Express-Limited Cups”,
“Cake”, “Slow Cook”, or “Mixed/Sweet” menu is
selected.
• When the preset time is less than what is indicated
in the following table.
Menu Timer setting guideline
Plain/White 1 h
Premium 1 h 20 min
Multigrain 1 h 10 min
Brown 1 h 30 min
GABA Brown 4 h 45 min
Porridge Cooking time + 1 min
Long-grain 45 min
• When “0:00” is blinking on the display
● If the Keep Warm lamp is on, press the [Cancel]
key to turn o the lamp. (The Timer function is not
available while the Keep Warm lamp is on.)
● If the rice cooker is not operated within about 30
seconds after pressing the [Timer] key, the rice
cooker will beep 3 times.
● If the [Timer] or [Start] key is pressed while the
rice cooker is in a state where the Timer function
is not available, the rice cooker will beep 3 times.
5
Use the [Hour] and
[Min] keys to set the
desired completion
time.
Press the [Hour] key to change the set time in
increments of 1 hour. Press the [Min] key to
change that time in increments of 10 minutes.
Hold down the corresponding key to change
the time more rapidly.
Blinks
• The time is displayed in a 12-hour format.
Note
● Do not set the timer to more than 12 hours, as it
may result in spoiled rice.
6
Press the [Start] key.
The Timer lamp will turn on and
the Timer function is set.
When the “Plain/White” menu is selected, the
rice cooker will make one short and one long
beeping sound. For other menus, the rice
cooker will only make one long beep.
On
On
• If you make a mistake or otherwise want to
reset the timer, press the [Cancel] key and
repeat the procedure from step
2
on P.20.
To Next Page
Loading...
Need help?
General
