20
6
1
2 3
・
5
6
4
Timer function (Timer 1 / Timer 2)
You can preset the time that you want cooking
to be actually completed.
• Select either “Timer 1” or “Timer 2” and set the
desired completion time. The start of cooking will
be automatically adjusted so that the operation is
completed at the preset time.
• Each timer can be set to dierent times. e.g. “Timer
1” for breakfast and “Timer 2” for dinner.
• The preset timer settings will be stored in memory.
Tips
● Example setting: If “Timer 1” is set to 1:30 PM,
cooking will be completed at 1:30 PM.
1
Check the current time.
Blinks
• See P.46 for the procedure to set the
present time.
2
Press the [ ] or [ ]
key to select the
desired menu.
The symbol will blink
while the menu is being
selected.
Blinks
• Conrm that the Keep Warm lamp is o.
O
• It is not necessary to press the (Menu) Select
key if the desired menu is already selected.
3
If you select the “Porridge”
menu, use the [Hour] and [Min]
keys to set the desired cooking
time.
• Each time the [Hour] key is pressed, the
set time will increase by 5 minutes. Each
time the [Min] key is pressed, that time will
decrease by 5 minutes.
• The cooking time can be set between 40 to
90 minutes in increments of 5 minutes.
Increases
by 5 min.
Decreases
by 5 min.
• The default setting is 60 minutes. Adjust as
desired.
4
Press the [Timer] key to
select either “Timer 1”
or “Timer 2”.
The selected setting will switch back
and forth between “Timer 1” and
“Timer 2” each time the [Timer] key is pressed.
Both the Timer lamp and the displayed “Timer
1” or “Timer 2” will blink.
Blinks
• The previously preset time will be displayed.
It is not necessary to set the timer again if the
desired completion time is already displayed.
Blinks
Using the Timer Function
To Next Page
Loading...
Need help?
General
