Time Scylon - Page 20

Assembly instructions
Battery assembly on the seat post:
The SHIMANO KBTDN1101 battery must be assembled on the TIME seat post using the supplied
Multi-Fit components.
- Slide the KBTDN1101 battery
6
into the Multi-Fit
holder
7
.
- Position the clamp
8
in the groove provided for
this purpose.
Scylon 34.jpg
- Slide the battery
6
and the clamp
8
into the
housing provided for this purpose.
- Screw the retaining screw
9
(moderate tightening).
Scylon 35.jpg
- Position the 22 mm setting
10
on the Multi-Fit
bracket
7
.
Scylon 36.jpg
NIM_Scylon-01
20
EN