SIGN IN
07.07.2022 11 / 62
"ENTER PASSWORD"
1. Use the touch zones to create the password. Each zone corresponds to a character: 0, 2, 4, C, 6, 8
and X.
ð NB: minimum 6 digits, maximum 14.
2. When you have entered the password, confirm with . You can return to the previous screen at
any point by using the BACK push-piece.
3. Enter the password a second time, then confirm with .
4. To avoid defining a password, select "No" and proceed to the next step.
ð The message "Setup completed" appears, which means the installation has been successfully
completed.
ð The hands position themselves to the correct time and the watch automatically self-locks.
5. If an error appears when you are trying to pair your watch to the Tissot T-Connect app, select
the "Try Again" option to restart the process.
6. If the problem persists, follow the steps below:
To Next Page
Loading...
