TIMING (Timing and Alarm)
44 / 62 07.07.2022
5. Select "Set mode" by pressing and turning . You will now have access to "Set mode", enabling
you to choose between timing types, and "LOGBOOK", for the most recent times recorded.
7.1.1 LAP (Lap timing)
The Lap Timing function is a timer for measuring lap time for a single runner, vehicle, etc. Maximum
measurement limit: 99 days 23 hours 59 mins 59 secs.
7.1.2 SPLIT (Intermediate timing)
The Intermediate Timing function is a timer for measuring the total duration of a race for up to
99runners or vehicles participating in the same timed event. For example: measuring the arrival time
of several runners in a 100-metre race.
7.1.3 LOGBOOK
Regardless of the type of pairing, the "LOGBOOK" function gives you access to the last timing taken, as
well as some statistics specific to the type of timing. To access these details, press and turn .
Please note: The stored data is deleted when you start a new timing from zero.
• Reading stored lap time data:
: in unpaired mode, all times measured by the lap timing function are stored and can be
displayed on the watch in the "LOGBOOK" function, together with statistics of the total race
duration and the fastest, slowest and average lap times.
: in paired mode, you will also find the most recent times recorded on the T-Touch Connect
Solar app. Under the History heading, you will also have access to the most recent timings taken.
• Reading stored intermediate time data:
: in unpaired mode, all timings measured by the intermediate timing function are stored
and can be displayed on the watch in "LOGBOOK" function.
: in paired mode and with the timer reset to zero, you can see the latest timings recorded
on the T-Touch Connect Solar app. Under the History heading, you will also have access to the
most recent timings taken.
7.2 TIMER
The "TIMER" function enables you to start a countdown of up to 23 hours 59 mins 59 secs.
To Next Page
Loading...
Need help?
General
