ACTIVITY
07.07.2022 27 / 62
4.2.1 Start the Bring Me Back function
If you want to interrupt your trip, and want to return to the start point guided by the T-Touch Connect
Solar, you must start the "BRING ME BACK" function on the watch screen using the crown .
Note:
The "BRING ME BACK" function is usable as soon as a GPS point has been saved. If this is not the case,
the function is not available, and the following screen will be displayed:
4.2.2 Description of the specific watch screens on the way back
The distance remaining to the start point is displayed on the watch screen.
If the watch is locked, the following screen will be displayed:
To Next Page
Loading...
