Tissot T-Touch Connect Solar User Manual

TIMING (Timing and Alarm)
07.07.2022 43 / 62
7 TIMING (TIMING AND ALARM)
To access the "TIMING" (Timing and Alarm) functions:
1. Unlock the watch with a long press on START.
2. Press the "TIMING" touch zone.
ð Pressing and turning will give you access to the following functions:
Chrono Timer Alarm
ð Please note: You can go back at any time by using the BACK push-piece.
7.1 CHRONO (Timing)
In "CHRONO" mode, various types of timing are available in addition to basic timing, such as lap
timing and intermediate timing.
Activation of timing functions:
1. Give the "START" push-piece a short press to start the timer
2. Give the "BACK" push-piece a short press to enter an intermediate time (e.g. lap time or arrival
of first runner)
3. Give the "START" push-piece a short press to stop the timer (e.g. end of last lap or arrival of last
runner)
4. Give the "START" push-piece a short press to reset the timer to zero
ð To choose between Lap Timing and Intermediate Timing

Tissot T-Touch Connect Solar Specifications

General

Case Material	Titanium
Connectivity	Bluetooth
Power Source	Solar
Case Diameter	47.5 mm
Operating System	Proprietary
Display	Digital
Case Thickness	15.3 mm
Display Type	MIP (Memory In Pixel)
Glass	Scratch-resistant sapphire crystal
Water Resistance	100 meters (10 ATM)
Compatibility	iOS, Android
Movement	Quartz
Functions	Altimeter, Compass, Timer, Chronograph
Strap Material	Rubber, Titanium
Battery Life	Up to 6 months on full charge (depending on usage)