.
25
Use these buttons to watch two different channels at the same time. See
Watching Two Channels Simultaneously on page 29.
1.4 Getting Started
Install the digital TV receiver properly, referring to Installation on page 8.
Turn on the main power switch on the rear of the receiver, and press the
power button on the remote control to turn on the receiver.
When turning on the receiver for the first time, the initial setup process au-
tomatically starts. Follow the on-screen instructions to finish the process. At
each step, either make a choice or skip the step:
1. Choose a language for the user interface.
2. Configure the network settings. See Network Connections on page 13
and Network Settings on page 54.
3. Install add-ons to internet-related apps, such as Free TV+ and iRa-
dio+, when an internet connection is available. Additionally, determine
whether to restore the receiver using the stored settings and channels,
if there is any backup data.
4. Set the clock. See Clock Settings on page 55.
5. Choose a broadcast media type and scan for channels. See Scanning
Channels on page 14.
I 5
To Next Page
Loading...
