2.1 Aerial Connections
Satellite Dish Connection
Connect the cable from the satellite dish to LNB IN of TUNER 1. In most
situations, connect LNB OUT of TUNER 1 to LNB IN of TUNER 2 using the
loop-through cable. Only when two satellite dishes are available without
any multi-dish switch, users should connect the cable from the other dish to
LNB IN of TUNER 2.
Aerial Connection
Connect the cable from the aerial or cable TV outlet to ANT IN.
2.2 TV Connections
This digital TV receiver has a wide range of connectors available for use by
a TV. The list below shows video connectors in the order of picture quality,
I 9
To Next Page
Loading...