Appendix A
Universal Remote Control
The remote control can expand its capabilities, allowing users to control the
TV connected to the receiver.
A user can transform the remote control into a universal remote control by
entering a 4-digit remote control code for the TV. Turn on the TV, and follow
these steps:
1. Find the TV’s brand name from the list of remote control codes.
2. Press the TV button and the OK button for 2 seconds simultaneously.
The TV button blinks twice.
3. Enter one of the available codes. If the code is not correct, the TV button
blinks once. Try the others until the TV turns off.
4. Press the OK button to finish. The TV button blinks twice.
If all of the codes appear not to work, follow these steps:
1. Press the TV button and the OK button for 2 seconds simultaneously.
The TV button blinks twice.
2. Press the up or down navigation button repeatedly within 10 seconds
at each attempt until the TV turns off.
3. Press the OK button to finish. The TV button blinks twice.
60
To Next Page
Loading...