At the scheduled time, the receiver turns on if it is off, and begins recording
the programme. Even if the receiver is set to turn off before the time that the
recording is supposed to finish, the receiver does not turn off until recording
is done.
Manually Scheduling TV Recordings
Manual scheduling of programmes is sometimes needed because the pro-
gramme guide is not always consistent with the actual broadcasting time.
There may be changes in broadcast schedules or delays due to other pro-
gramming.
Open the Settings > System Tools > Schedule menu.
Add a recording event: Press the green button. Specify the program de-
tails, including channel and start time. To display the programme at the
scheduled time without recording, set Type to Play. With Alarm Confirm
Message enabled, a message appears to notify that the event will start in 3
minutes. Select Yes when finished.
View recording events by date: Press the yellow button to open the calen-
dar. Select a date to view its recording events.
Edit a recording event: Place the focus on an event entry, press the OK
button.
Delete a recording event: Place the focus on an event entry, press the red
button, and then confirm to delete it. To delete all events at once, press the
blue button.
5.2 Time-Shifting
Time-shifting temporarily records the current programme. Using this fea-
ture, users can pause and resume a live programme and even scan through
it backward or forward. For example, simply pause or skip backward in the
R TV 35
To Next Page
Loading...
