• Video Output Mode: Determine which colour space to use for the
SCART output. RGB is much higher quality than CVBS.
• HDMI Dolby Digital: Determine whether or not to pass through Dolby
audio via HDMI when available.
• Dolby Digital Default: Determine whether or not to use Dolby audio
when available.
• Sound Mode: Generally, an audio track has two sound channels. Deter-
mine which sound channel to use by default.
• Power Saving in Standby Mode: With this enabled, the receiver’s front
display shows nothing when in standby mode. With this disabled, it dis-
plays the current time.
• Audio Sync Delay: If the sound and picture don’t match up, adjust this
until they match.
8.5 On-Screen Display Settings
Open the Settings > Configuration > Display Setting menu.
• Info Box Position: Specify how much to raise or lower the position of the
programme information dialogue box.
• Info Box Display Time: Specify how long to display the programme in-
formation dialogue box when changing channels.
• Volume Bar Display Time: Specify how long to display the volume bar
when adjusting the volume.
• Zapping Mode: Determine what to display when changing channels.
With this set to Black Screen, the receiver displays nothing. With this set
to Freeze, the receiver displays the last still picture of the previous chan-
nel.
• Up/Down Key: Determine for what to use the up and down naviga-
tion buttons when watching a channel. With this set to Simple Service
56 8.5 O-S D S
To Next Page
Loading...
