8.7 Maintaining the Digital TV Receiver
The internal flash memory is used for maintaining the preference settings
and channel data.
Open the Settings > Installation > System Recovery menu.
Use these to reset the digital TV receiver.
• System restore to factory default: Reset all settings to factory defaults
and clear all channels.
• Reset configuration data: Reset all settings to factory defaults.
• Reset service data: Clear all channels.
Use these to back up and restore the receiver.
• System restore to stored position: Restore the receiver using the stored
settings and channels.
• Store system data: Back up all settings and channels.
• Delete stored position: Clear all stored settings and channels.
It is also possible to share the receiver’s settings and channel data with other
receivers of the same kind, using a flash drive. Connect a flash drive to one
of the receiver’s USB ports.
Open the Settings > System Tools > Data Transfer menu.
• Transfer All System data to USB storage: Export all settings and chan-
nel data to the flash drive.
• Transfer Service data to USB storage: Export all channel data to the
flash drive.
• Data download from USB storage: Import settings and channel data
from the flash drive.
58 8.7 M D TV R
To Next Page
Loading...
