8.3 Clock Settings
Open the Settings > Configuration > Time Setting menu.
• Local Offset: Specify the time zone where the receiver is located.
• Daylight Saving: To apply daylight saving time, specify the country
where the receiver is located.
• Clock Mode: Determine which to use between 12-hour and 24-hour
clock formats.
For Wake Up Mode and Sleep Mode, see Setting Up Timers on page 31.
8.4 Audio and Video Settings
Open the Settings > Configuration > A/V Output Setting menu.
• TV Type: Determine which TV standard to use.
• TV Aspect Ratio: Determine which aspect ratio to use by default.
• Display Resolution: Determine which resolution to use by default. Tech-
nically, 1080p is better than 1080i, but the difference is only slight to most
people.
• Display Format: Determine how to display 4:3 pictures on the 16:9
screen, or vice versa.
• Pillar Box: 4:3 pictures fit the height of the 16:9 screen with black bars
on the sides.
• Full: 4:3 pictures blow up to fit the width of the 16:9 screen with the
top and bottom edges cut off.
• Letter Box: 16:9 pictures fit the width of the 4:3 screen with black
bars on the top and bottom.
• Pan Scan: 16:9 pictures blow up to fit the height of the 4:3 screen
with the sides cut off.
P S 55
To Next Page
Loading...
