5
5-19
4st 9.9/15/20 2008
9. Remove bolt 8 (4), and then, remove drive shaft housing
cover 9.
10. Remove power unit by removing bolts 0 (6) and then
hoisting it.
9
8
7
5
4
6. Remove oil level gauge 4.
7. Disconnect lower breather hose 5.
8. Disconnect cooling water (pilot water) hose
6
and fuel hose
7
.
When hoisting power unit, perform the work
carefully while checking if wires and hoses are
caught by other parts.
Before removing power head ass'y, note
arrangement of oil strainer hose.
E_MFS20C_ch05_090105.qxd 09.1.20 5:25 PM ページ 19
To Next Page
Loading...
Need help?
General
