6-20
Lower Unit
4st 9.9/15/20 2008
28) Inspection of Gear Case
1. Check skeg area a and torpedo-like area b for crack and
damage. Replace if necessary.
29) Assembly of Lower Unit
Cam Rod Bushing Bolt :
6 N · m (4 lb · ft) [0.6 kgf · m]
1. Install cam rod ass'y 1 as shown.
Perform shim adjustment when ball bearing,
gear, drive shaft, propeller shaft or gear case is
replaced.
Be careful of direction of cam rod.
30) Assembly of Gear Case
1. Use the following tools to install taper roller bearing 1 outer
race.
Bearing Outer Press Kit :
P/N. 3B7-72739-1
Bearing Outer Press Plate 1 :
P/N. 3BJ-72732-0
Bearing Outer Press Guide 2 :
P/N. 3BJ-72733-0
Bearing Outer Press Rod 3 :
P/N. 3B7-72731-0
E_MFS20C_ch06_081216.qxd 09.1.20 5:27 PM ページ 20